This document describes the CoreLockr^TM Cryptographic API that is provided to allow easy access to the cryptographic functions implemented by cryptographic hardware via a CoreLockr^TM Cryptographic Executor (CCE). For all kits, including Variscite.

This document is an overview of the EmSPARK^TM Security Suite 3.1 contents, CoreLockr^TM APIs' & EmPOWER^TM capabilities and example applications included in the SecEdge's EmSPARK^TM Security Suite. For all kits, including Variscite.

This document is a one page correction of the EmSPARK™ Security Suite CoreLOCKR™ Libraries User Guide, Section 3.1.2 Opaque Key Example.

The EmSPARK Suite – Evaluation Kit, Getting Started guide provides an overview of the prerequisites to use the Evaluation Kit and the Kit package contents. It also provides information to flash the secure bootloader on the board, install the file system on SD Card and start the system.

The Getting Started Guide provides an overview of the steps to use the Shield96 Trusted Platform and the EmSPARK Security Suite package.

The EmSPARK Suite - Evaluation Kit, Getting Started guide provides an overview of the prerequisites to use the Evaluation Kit and the Kit package contents. It also provides information to flash the secure bootloader on the board, install the file system on SD Card and start the system.

The EmSPARK Suite - Evaluation Kit, Getting Started guide provides an overview of the prerequisites to use the Evaluation Kit and the Kit package contents. It also provides information to flash the secure bootloader on the board, install the file system on SD Card and start the system.

The EmSPARK Suite - Evaluation Kit for Variscite VAR-SOM-MX8M-PLUS Device, Getting Started Guide provides an overview of the prerequisites to use the Evaluation Kit and the Kit package contents. It also provides information to flash the secure bootloader on the board, install the file system on SD Card and start the system.

EmPOWER™ is a SaaS solution that provides the lifecycle management platform needed to secure, provision and update intelligent edge devices. On the cloud side is the Control Center featuring a web-based customer interface. On the device side is the Device-Client component. The EmPOWER^TM Device-Client requires the EmSPARK^TM Security Suite which includes the required firmware and filesystem Variscite VAR-SOM-MX8M-PLUS or DART-MX8M-PLUS device based on NXP i.MX 8M Plus provisioned with the contents of the EmSPARK Suite Evaluation Kit.

The EmSPARK™ Secure Boot identifies, authenticates, and starts up the software on the device when the device is powered on. In addition, it provides boot resiliency and facilitates secure firmware update. Several stages of authentication, protection, and encryption/decryption protect the firmware images stored in the non-volatile memory (NVM) whether or not the device is powered on. Boot resiliency implements failover logic using two boot stacks and an i.MX8 hardware watchdog. Secure firmware update verifies the authenticity of update payloads.

This Getting Started Guide is an overview of the prerequisites to use the EmSPARK™ Suite Evaluation Kit, description of the Kit contents, and installation instructions on a Jetson Xavier NX Developer Kit. After completing the installation process in this guide, please see the CORELOCKR_LIBRARIES_GUIDE.pdf which provides an overview of the CoreLockr™ APIs.

This Getting Started Guide is an overview of the prerequisites to use the EmSPARK™ Suite Evaluation Kit, description of the Kit contents, and installation instructions on a Aaeon device. After completing the installation process in this guide, please see the CORELOCKR_LIBRARIES_GUIDE.pdf which provides an overview of the CoreLockr™ APIs.